Your Home Page Nevr Being Changed.

Some websites illegally modify your registry editor and set their website as default home page,


To stop this,



1. Right-click on the Internet Explorer icon on your desktop and select "Properties".

2. In the "Target" box you will see "C:\Program Files\Internet

Explorer\IEXPLORE.EXE".

3. Now by adding the URL of the site to the end of this it overrides any
Homepage setting in internet options:

"C:\Program Files\Internet Explorer\IEXPLORE.EXE" www.hack4machine.blogspot.com

Enter in to Windows xp without entering any password

1. Place your Windows XP CD in your cd-rom and start your computer (it’s assumed here that your XP CD is bootable – as it should be - and that you have your bios set to boot from CD)

2. Keep your eye on the screen messages for booting to your cd Typically, it will be “Press any key to boot from cd”

3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.

4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now

5. The Licensing Agreement comes next - Press F8 to accept it.

6. The next screen is the Setup screen which gives you the option to do a Repair.

It should read something like “If one of the following Windows XP installations is damaged, Setup can try to repair it”

Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process.

7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.

8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds”

9. During the reboot, do not make the mistake of “pressing any key” to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.

10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.

11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.

12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).

13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.

I tested the above on Windows XP Pro with and without SP1 and also used this method in a real situation where someone could not remember their password and it worked like a charm to fix the problem. This security hole allows access to more than just user accounts. You can also access the Registry and Policy Editor, for example. And its gui access with mouse control. Of course, a Product Key will be needed to continue with the Repair after making the changes, but for anyone intent on gaining access to your system, this would be no problem.

And in case you are wondering, NO, you cannot cancel install after making the changes and expect to logon with your new password.

Cancelling will just result in Setup resuming at bootup and your changes will be lost.

Ok, now that your logon problem is fixed, you should make a point to prevent it from ever happening again by creating a Password Reset Disk. This is a floppy disk you can use in the event you ever forget your log on password. It allows you to set a new password.

Here's how to create one if your computer is NOT on a domain:

* Go to the Control Panel and open up User Accounts.
* Choose your account (under Pick An Account to Change) and under Related Tasks, click "Prevent a forgotten password".
* This will initiate a wizard.
* Click Next and then insert a blank formatted floppy disk into your A: drive.
* Click Next and enter your logon password in the password box.
* Click Next to begin the creation of your Password disk.
* Once completed, label and save the disk to a safe place

How to Log on to your PC Using Your Password Reset Disk

Start your computer and at the logon screen, click your user name and leave the password box blank or just type in anything. This will bring up a Logon Failure box and you will then see the option to use your Password Reset disk to create a new password. Click it which will initiate the Password Reset wizard. Insert your password reset disk into your floppy drive and follow the wizard which will let you choose a new password to use for your account.






plz comment....

HOW TO HIDE DESIRED FOLDER ...WITHOUT USING FOLDER OPTION...

OPEN CMD

GO TO the directory containing a folder that you wants to hide... using CD (change directory) command;

Then write following command:

>attrib foldername +s +h    (this will hide your folder)

>attrib foldername +s -h    (this will unhide your folder)



suppose you wants to hide a folder whose name is "image".......and it is in e: directory

then write following command:

>cd/
>cd e:
>attrib image +s +h    (it will hide the image folder)
>attrib image +s -h     (it will unhide the image folder)


U can also create a batch file that can hide folder by double clicking that file:

simply put all command that we have written in CMD into text file

and SAVE it as  .bat extension ........

your file is not shown in the search result.........

Install Windows 7 Using Pendrive Without using any software..

1: Format Pendrive With Selecting NTFS Partition...

2: Insert windows 7 cd and Copy all files from it to the pendrive..

3: Then open CMD with Run as Administrator Privilege

4: go to the CD DRIVE having Windows 7 CD..

5: then write following COMMAND:

>cd boot
>bootsect.exe/nt60 J:{PENDRIVE LETTER}

THEN MSG  WILL BE DISPLAYED AS "BOOT CODE UPDATED SUCCESSFULLY ON TARGET DEVICE" .

6: now your pendrive is bootable .....

Note: plz select PENDRIVE OR REMOVABLE DEVICE in boot option .

DONE.........

Delete An undeletable File

Delete An "undeletable" File

Open a Command Prompt window and leave it open.
Close all open programs.
Click Start, Run and enter TASKMGR.EXE
Go to the Processes tab and End Process on Explorer.exe.
Leave Task Manager open.
Go back to the Command Prompt window and change to the directory the AVI (or other undeletable file) is located in.
At the command prompt type DEL <filename> where <filename> is the file you wish to delete.
Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart the GUI shell.
Close Task Manager.


Or you can try this

Open Notepad.exe

Click File>Save As..>

locate the folder where ur undeletable file is

Choose 'All files' from the file type box

click once on the file u wanna delete so its name appears in the 'filename' box

put a " at the start and end of the filename
(the filename should have the extension of the undeletable file so it will overwrite it)

click save,

It should ask u to overwrite the existing file, choose yes and u can delete it as normal


Here's a manual way of doing it. I'll take this off once you put into your first post zain.

1. Start
2. Run
3. Type: command
4. To move into a directory type: cd c:\*** (The stars stand for your folder)
5. If you cannot access the folder because it has spaces for example Program Files or Kazaa Lite folder you have to do the following. instead of typing in the full folder name only take the first 6 letters then put a ~ and then 1 without spaces. Example: cd c:\progra~1\kazaal~1
6. Once your in the folder the non-deletable file it in type in dir - a list will come up with everything inside.
7. Now to delete the file type in del ***.bmp, txt, jpg, avi, etc... And if the file name has spaces you would use the special 1st 6 letters followed by a ~ and a 1 rule. Example: if your file name was bad file.bmp you would type once in the specific folder thorugh command, del badfil~1.bmp and your file should be gone. Make sure to type in the correct extension.


that's all......enjoy

Create One-click Shutdown And Reboot Shortcuts

Create One-Click Shutdown and Reboot Shortcuts:


First, create a shortcut on your desktop by right-clicking on the desktop, choosing New, and then choosing Shortcut. The Create Shortcut Wizard appears. In the box asking for the location of the shortcut, type shutdown. After you create the shortcut, double-clicking on it will shut down your PC.

But you can do much more with a shutdown shortcut than merely shut down your PC. You can add any combination of several switches to do extra duty, like this:

shutdown -r -t 01 -c "Rebooting your PC"
Double-clicking on that shortcut will reboot your PC after a one-second delay and display the message "Rebooting your PC." The shutdown command includes a variety of switches you can use to customize it. Table 1-3 lists all of them and describes their use.

I use this technique to create two shutdown shortcuts on my desktop—one for turning off my PC, and one for rebooting. Here are the ones I use:

shutdown -s -t 03 -c "Bye Bye m8!"
shutdown -r -t 03 -c "Ill be back m8 ;)!"

Switch
What it does

-s
Shuts down the PC.

-l
Logs off the current user.

-t nn
Indicates the duration of delay, in seconds, before performing the action.

-c "messagetext"
Displays a message in the System Shutdown window. A maximum of 127 characters can be used. The message must be enclosed in quotation marks.

-f
Forces any running applications to shut down.

-r
Reboots the PC.


that's all.....enjoy.
plz comment...

Check Friends Mobile Balance In Docomo

1:Dial 09045012345 and Select language by pressing 1 Or 2
2:Then, Select 1
3:Type < your friends 10 digit tata docomo no > 
4:Then Select 1.
That’s it...enjoy

how to unlock idea NetSetter Huawei E1550

Insert Your idea netsetter Huawei wireless device with default simcard(which u buy with your idea netsetter).


1.Download universal master code generator:
   then run it and enter your device's IMEI number :

then press calculate .......it will calculate :UNLOCK CODE & FLASH CODE




2:Now, Download E-1550 Huawei modem firmware and Install Huawei firmware E-1550 For idea India (Download from here ).
then run it . it will update firmware of your device....
while running it will require FLASH CODE then enter it from UNIVERSAL MASTER CODE GENERATOR:




3:download  Huawei  E-1550 Netsetter Unlocker(code writer).Click here to  Download it From Here.

   click on Please Select Com Port:

click on Detect (it will detect the your modem).   
then select it and press Accept:
it will require UNLOCK CODE  plz enter it from the UNIVERSAL MASTER CODE GENERATOR.


4:that's all 
now your device is UNLOCKED and so now you can insert any sim:


NOTE:If you want to download Mobile Partner’s 11.302.09.01.539   :Click here 
          To download  Video MMS Dashboard. Click here to  Download


plz comment.........

Create a bootable CD or DVD with or without floppy

With the CD-ROM available on almost every computer nowaday, floppy drives become a history. However, for those who find computers a hobby, might run into a situation when they need to create a bootable CD that works just like the old floppy disk. Unfortunately, to do this, you still need a floppy drive to read your bootup floppy disk. Wait, the good news is, you can just down load a bootable ISO image and burn it to a CD. And even better, we have a copy of an ISO image right here. You can download this image and follow the instructions below, or you can do a web search for more options.

The information on this article will guide you step-by-step how to create a bootable CD/DVD, either using a bootup floppy disk or a boot image file. You will end up having a bootable CD or DVD, with CD-ROM driver supported, that could startup your PC and bring up the command prompt. This is going to be a good starting point, then you can run other utilities such as hard drive ghost, etc..
Many current CD/DVD burning software support the bootable feature. If you already have your favorite burning software, look around to find the bootable option. For this article, I will use the steps and sample screen-shots with the burning tool called Nero.
You will need a boot disk (floppy) or a bootable ISO image to start. If you don't have one, you can download an ISO image here. This boot image is Windows-98 based, which means it uses the Windows 98 bootup sequence, which should do what we need. You can also download different boot disk images from the internet. I've found bootdisk.com has a very good collection.
I assume that you already have Nero installed. Also, it is highly recommended to use a rewritable disc so you can redo the process if you have to.

1. Launch Nero Burning ROM
2. At the New Compilation Window, select "CD" from the drop-down menu and select "CD-ROM (Boot)" for CD, (or select "DVD" and "DVD-ROM (Boot)" for DVD)
   
   
   
   
3. If you use a bootup floppy disk, insert the floppy disk and select "Bootable logical drive..."
   
   
4. If you use an image file, select "Image File" then click "Browse" to browse to the image.
   At the "Open" Window, browse to the location where you saved the boot image and choose the image you wish to use and click "Open" (you might need to change the "Files of type" to "All Files" in order to see files with different extensions.)
   
   
5. Click "New" at the New Compilation Window.
6. Nero New Compilation Window disappears and Nero brings up its main screen where you can add more files to the CD/DVD if you wish. For example, adding a "ghost" folder with the file "ghost.exe" as follows.
   Once you're done adding all the files you wish to, click on the "Burn" icon.
   
   
   
7. At the "Burn Compilation" Window, select "Burn"!
8. done

Delete administrator Password without using software

Method 1

Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.

Method 2

Step 1. Put your hard disk of your computer in any other pc .Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ).Step 3. Then open that drive in which the victim’s window(or your window) is installed.Step 4. Go to location windows->system32->configStep 5. And delete SAM.exe and SAM.log 
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer 

install windows 7 or xp through pendrive

1. Insert your USB flash/pen drive to your system and backup all the data from the USB as your USB drive will be formatted during the process.

2. Now download WinToFlash tool (free) from here.

3. Run the tool, and browse to your Windows 7, Vista, or XP DVD files (make sure that your USB drive letter is correct).

4. Click Create button to begin the bootable USB process. Wait for few minutes to see the bootable USB.

5. done.........

6. plz comment